Haiyang optical spectrometer
performance
- Wavelength range: 200-1025nm
- Optical resolution: FWHM (configuration dependent) -0.1-10.0 nm
- Signal-to-noise ratio: (full signal) Flame-S: 250:1 Flame-T: 300:1
- Dynamic range: 1300:1 (single acquisition) 8.5×107 (system)
- Integration time: Flame-S: 1ms-65s Flame-T: 3.8ms-10s
- 16-bit A/D conversion, 4 in trigger mode
apply
- Agricultural measurement and inspection
- Laser characterization
- Air and water quality analysis
- Photovoltaic analysis
- Biomedical
- Plasma monitoring
- LED measurement, light measurement
performance
- Scan speed: 4500 scans per second at high speed (varies depending on operational configuration and system performance)
- Optical resolution: depends on 0.8 nm (FWHM) watts / 600 lines / mm of grating and 5 μm of slits
- Dynamic Range (F Single Scan): 5000:1
- Signal-to-noise ratio (F single scan): 290:1
- Integration time: 10μs-10s
- Buffer depth: The on-board cache can accommodate up to 50,000 spectra
- Easy connection to other devices – simultaneous operation via Gigabit Ethernet, Wi-Fi wireless,
- SPI and USB
- Working temperature: 0-50 °C
apply
- Agricultural measurement and monitoring
- chemistry
- biomedicine
- Air and water quality analysis
- Food sorting and processing
- 90% very high quantization rate and very low Eternalon effect
- Signal-to-noise ratio (> 1000:1) and increases processing speed
- TEC cooling (up to -15°C) allows the detector to have lower noise and is more conducive to low-light detection
- And the integration time can be continuously adjusted from 8ms to 15 minutes, and the spectrum will not be distorted and deformed
- Provides 900 reticulated wire/mm grating (#H36) with a flash wavelength of 500 nm and has a good spectral response for both 532 nm and 785 nm laser Raman
- Thermal stability
- Internal shutter (optional)
apply
- Biotechnology applications
- Medical diagnosis
- Protein and accounting analysis
- Polymer analysis
- chemistry
- Metallurgical analysis
- 90% quantization rate
- Low electronic noise
- Optical resolution (FWHM up to -0.035nm); resolution depends on the number of reticles and slit size of the raster
- 14 grating options, including the HC-1 composite grating covering the range of 175-1100 nm
- Available slits are 5 μm, 10 μm, 25 μm, 50 μm, 100 μm and 200 μm
- Detector focusing lenses enhance signal strength
- Signal measurements can be software-programmed to control (single or continuous), GPIOs digital interface spectrometer operation
apply
Suitable for scientific experiments with low brightness and high ultraviolet sensitivity
- Optical resolution: FWHM up to 0.02nm
- Wavelength range: 200-1100 nm, the specific spectral range and resolution configuration depends on the actual grating and slit selection
- On-board microcontroller
- Optical platform
- Sampling attachments
apply
- It is suitable for laser measurement, gas absorption measurement and measurement of atomic radiation lines
- Wavelength range: 900-2200nm/raster NIR2
- Optical resolution: FWHM <0.25nm
- Dynamic range: 7.5×106 (system); 10000:1 for a single acquisition
- Signal-to-noise ratio: 10000:1 @100ms points
- Rasters (custom): NIR2, NIR3, NIR10, NIR11, NIR12 and NIR13
apply
- Moisture detection
- Medical and biotechnology applications
- High resolution laser and fiber characteristic applications, etc
