German femtosecond laser
German MenloSystems femtosecond fiber laser 780nm
The all-fiber design of the ELMO 780 laser guarantees excellent laser stability and low noise operation. The laser is maintenance-free, self-installable and output at the touch of a button. This is a fully OEM-ready laser that operates 24/7.
Performance data
- Wavelength 780 nm
- Output power > 140mW
- Pulse width < 100fs
- Repeat rate 100MHz
- Minimum volume – no external control unit
Amplitude noise < 0.5% rms (over 24 hours) |
Laser performance with the same repeatability and consistency |
apply
- Seed light source for laser amplifiers
- THz is produced with THz physics
- Ultrafast spectroscopy
- Multiphoton excitation process
- Two-photon polymerization with 3D printing
Main features
- Portable second harmonic (SHG) module
- High stability
- Low amplitude and phase noise
- Fully guaranteed partial fiber solution
- Single clamping state
- Figure 9 Clamping technology
| specification | ELMO780 | ELMO780 HP |
| Center wavelength | 780 nm ± 10 nm | |
| Average power | >75 mW | >140 mW |
| Pulse width | <100 fs | |
| Output port | Free space | |
| polarization | Linear, p-polarized** | |
| Dispersion control | Portable SHG Module: Allows up to 0.5 m of external fiber optic patch cord* | |
| Repetition frequency | 100 MHz (50-100 MHz，If selected VARIO)* | |
| Operating voltage | 100/115/230 VA with 12V external power supply included | |
| power consumption | 20 VA | |
| Operating temperature | 15 °C – 35 °C | |
German MenloSystems femtosecond fiber laser 1030nm
YLMO’s fully guaranteed bias fiber design guarantees ultra-high stability and low phase noise for system operation. As the seed light source for the amplifier, the oscillator is maintenance-free and can be installed by the user and can be operated with just one click. In short: an OEM laser that works 24/7.
Main specifications
- Wavelength 1030 nm
- Output power > 2W
- Repetition rate 50-100MHz
apply
The seed light source of the amplifier is suitable
- Higher-order harmonic generation
- Atsecond Science
- Ultrafast spectroscopy
- Material processing
- ophthalmology
Main features
- High stability
- Low amplitude and phase noise
- Fully guaranteed partial fiber solution
- Single clamping state
- Figure 9 Clamping Technique
- Laser output within 60 seconds of one-click activation
Performance data
YLMO with amplifier < 1% rms (continuous measurement for more than 12 hours at room temperature, YLMO as Menlo BlueCut seed source)
 |
 |
 |
| specification | YLMO | YLMO HIGH POWER | YLMO-2W |
| Center wavelength | 1030 nm ± 10 nm** | ||
| Average power | >5 mW | >200 mW | >2 W |
| Pulse energy | >100 pJ | >4 nJ | >20 nJ |
| Output port | Fiber coupling, SC/APC | Free space | |
| polarization | Linear, polarized fiber | Linear | |
| Operating voltage | 5 VDC, 12 VDC/2 A** | 100/115/230VAC | |
| power consumption | 10 VA | 120 VA | |
| Operating temperature | 15 °C – 35 °C | ||
